Homeowners, property managers, and commercial clients in Lakewood call us for the full range of electrical work: repairs and troubleshooting, panel upgrades, new circuits, lighting, ceiling fans, EV charger wiring, and backup generator hookups. A city of this size generates every kind of electrical call, from a landlord turning over a rental unit to a business adding circuits for new equipment. We handle all of it, and we are available every day from 8:30 AM to 10:30 PM.
Calls are answered here, and the work gets scheduled properly. When you call, you reach someone who knows the trade and can talk through what the job involves before anything is booked. Whether the work is urgent or you are planning ahead, the process is the same: describe the situation, get a clear picture of what is involved, and confirm a time that works. We serve Lakewood and the surrounding Jefferson County area.
Electrical work rarely happens in a vacuum. The parts that go into a repair or an upgrade have to match what is already in the wall, at the panel, and on the circuit. For most jobs, standard parts are straightforward. For others, what is already installed matters a great deal, particularly in older properties where the original wiring, panel, or fixtures are no longer in common production.
A fuse box that predates modern breaker panels, a panel brand whose breakers are no longer manufactured, or a fixture wired with cloth-covered conductors all require a different approach than a standard repair. In those cases, the right answer is not to force a modern part into an old system. It is to scope what needs to change and do it correctly.
Some jobs can be completed in a single visit. Others depend on a part that is not stocked locally and has to be ordered. When that is the case, we say so on the call rather than after the visit. If a specific breaker, fixture, or fitting needs to come from a supplier, the timeline shifts, and you know that before anything is scheduled. The goal is to avoid a half-finished job sitting open while you wait for a part nobody mentioned at the start.
The price for electrical work is set by what the job actually involves, and three things move it more than anything else. The first is what the fault turns out to be once it is traced. A dead outlet that has a loose connection behind the plate is a different job from one that has a wiring fault three circuits back. The second is what has to be opened up to reach it. Work inside a finished wall takes longer than work in an unfinished basement. The third is whether the existing circuit or panel can carry the change being made. Adding a circuit to a panel that is already at capacity means the panel conversation comes first.
When you call, describe what you are dealing with. The person who answers can scope most jobs on the phone and give you a rate before anything is scheduled. You are told what the price covers and what would change it. If the job turns out to involve more than what was described on the call, that conversation happens before the work starts. The price is confirmed before we schedule, and you get a straight answer about what it includes.
A ceiling fan installation is straightforward when the existing box is rated to carry the weight and the wiring is already in place. It gets more involved when the box has to be replaced with a fan-rated one, or when the circuit needs to be run from scratch because there was only a light before. We handle both, including the wiring where no existing path is present.
Three-way switching controls a single light or fixture from two locations, which is standard on stairways and long hallways. Multi-location switching extends that to three or more points. The wiring for these setups is more involved than a standard single-pole switch, and getting it wrong means a switch that works from one end but not the other. We trace the existing wiring before touching anything and wire the new configuration to match.
Low-voltage work covers the wiring that does not run on a standard circuit: doorbell wiring, data and network cabling, speaker rough-in, and similar runs. In a city with a large share of multi-unit and commercial properties, this kind of work comes up regularly during renovations and tenant build-outs. We handle the rough-in and the terminations, and we confirm the existing low-voltage infrastructure can support what is being added.
Knob-and-tube wiring was the standard in homes built before the mid-twentieth century, and a number of older properties in the Jefferson County area still carry it. The problem is not that it was poorly installed at the time. The problem is that it was not designed for modern electrical loads, it lacks a ground conductor, and it cannot be safely extended or modified the way modern wiring can. Replacing it involves running new cable through the existing structure, updating the circuits at the panel, and bringing the affected areas up to current code. It is a larger job, and the scope is confirmed on the call before anything is scheduled.
Backup generator hookups, panel upgrades, and heat tape circuits come up regularly in this part of Colorado, where extended winter outages and heavy heating loads put real pressure on older electrical systems. We handle all three on the electrical side: transfer switch installation for generators, load calculations and panel replacement for undersized service, and dedicated circuit runs for heat tape at pipes and roof edges. The fault traced before anything is replaced is the standard we hold to across all of it.
Flickering lights fixed. Dead outlets revived. Power back on.
Property managers and commercial clients often need work done without disrupting tenants or business hours. We work with that. If a retail space needs a panel inspection between close and open, or a rental unit needs outlet work during a turnover window, the scheduling conversation happens on the call and we confirm what is available.
For problems that will not keep, short-notice calls are part of what we handle. We are open every day from 8:30 AM to 10:30 PM, which means a problem that surfaces on a Saturday evening does not have to wait until Monday. Prompt response, even for last-minute electrical calls, is part of how we operate.
Call (720) 536-2956 and ask what the current schedule allows.
For larger projects, the process is the same whether you are planning a full panel upgrade or a multi-room lighting overhaul. The scope is confirmed on the call, the price is set before scheduling, and the work is done in a sequence that keeps disruption to a minimum.
There is always a list. An outlet in the garage that has never worked. A switch that sparks when you flip it. An exterior light that stopped coming on and has been off for two seasons. These are not emergencies, so they stay on the list.
The outlet that has never worked is worth a call because the reason it does not work is unknown until it is traced. A wiring fault that has been sitting dormant is not the same as one that is actively causing a problem, but the difference between the two is not always obvious from the outside. A sparking switch is a more urgent version of the same situation. Arcing at a switch is a sign of a connection that has deteriorated, and deterioration does not stop on its own.
Exterior lighting that has been out for a while is easy to ignore because it is outside and the consequence feels abstract. The consequence is a dark entry, a dark driveway, and a security gap that builds quietly. We get to the bottom of the problem fast, and most of these deferred jobs take less time than people expect. We'll sort the wiring and clean up after.
Safe wiring. Solid workmanship. Straight answers.
A breaker that trips on a Tuesday but not a Wednesday. A circuit that fails when the dryer and the microwave run at the same time. A fixture that flickers in wet weather and works fine the rest of the time. These are the faults that are easy to dismiss because they are not constant, and they are the ones most likely to get worse rather than better.
Finding an intermittent fault is its own job. It involves understanding the load pattern, checking connections under the conditions that cause the problem, and sometimes monitoring the circuit rather than just inspecting it once. We trace the fault before recommending a fix, which means the repair addresses what is actually wrong rather than what seems most likely at a glance.
A circuit that fails under load can mean an overloaded breaker, a loose connection that heats up under current, or a wire gauge that is undersized for the circuit it is on. Each of those has a different fix. Replacing the breaker when the problem is a connection is a repair that does not hold. Identifying which one it is takes more time up front and saves a return visit. That is the standard we work to. Before booking anything, the page that lists our electrical services is worth a read.
We cover Lakewood and the communities around it in Jefferson County. Nearby areas we serve regularly include Applewood, Edgewater, Wheat Ridge, East Pleasant View, and West Pleasant View. If you are just outside Lakewood and wondering whether your address is covered, call and we will confirm it on the call.
The work is handled locally. Whether the job is in a single-family home, a multi-unit property, or a commercial space in Jefferson County, the process is the same: scope confirmed on the phone, price set before scheduling, work done to code.
That depends on what the insurer requires. Some insurers ask for a specific form or a permit sign-off. We go over what documentation the job generates when it is scoped, and if the insurer has a particular requirement, it is worth raising that on the call before the work is scheduled.
Yes, and it often makes sense to do that. If you have a list of outlet replacements, a fixture swap, and a fan installation, grouping them means one visit rather than three. Call and run through the list so we can confirm everything fits and schedule accordingly.
We work around the access that is available. If the tenant cannot be present, the property owner or manager can arrange access, provided someone is on site to confirm the work and review it before we leave. We go over the arrangement on the call.
Buyers and lenders increasingly flag knob-and-tube wiring during inspections, and some insurers treat it as a condition that needs to be addressed before coverage is issued. If you are selling, buying, or planning a renovation in an older Jefferson County home, understanding what the wiring involves and what replacement would cover is worth knowing before you are in the middle of a transaction. Call and we can walk through what a scope typically looks like for a property like yours.
A well pump runs on a dedicated circuit sized to the pump's motor rating, typically 240 volts. We run the circuit from the panel to the pump location, install the appropriate disconnect, and confirm the panel has the capacity. If the existing wiring to the pump is deteriorated or undersized, we replace it as part of the job.
Homes built before the 1970s in this part of Jefferson County often carry panels that were sized for a fraction of the electrical load modern households draw, wiring that lacks a ground conductor, and outlet configurations that do not meet current GFCI and AFCI requirements. Knob-and-tube wiring, aluminum branch circuit wiring, and fuse boxes that have been patched over the years are all common in older properties here. Each of those has a straightforward path to correction, and the scope is confirmed on the call before any work is scheduled.
We can run a circuit or install a weatherproof outlet to supply temporary power for an outdoor event. The scope depends on the load, the distance from the panel, and how the supply needs to be configured. Call and describe what you need to run and where, and we will go over what the job involves.
When you need an electrician in Lakewood, call (720) 536-2956.
We are available every day from 8:30 AM to 10:30 PM. Reach out to Littleton Electrical Company and you get a straight conversation about what the job involves, what it costs, and when it can be done. The work is completed properly, the area is cleaned up before we leave, and you are not handed a surprise at the end.
Pick up the phone and we'll get rolling.
We also take electrical work in: Wheat Ridge, Dakota Ridge, Englewood.
Take a look at our coverage area.
Below is a plain-language look at the electrical work we handle in Lakewood and the surrounding area. Each service is described by what it covers, who it fits, and one practical thing worth knowing before you call. If a job you need is not on the list, call us and we will talk through it.
| Type of Work | What It Covers | Best For | Good to Know |
|---|---|---|---|
| Outlet & Switch Installation |
| Homeowners updating older outlets or adding protection in kitchens, bathrooms, and garages | A single dead outlet is sometimes a tripped GFCI upstream rather than a failed device. We check the whole circuit before recommending a replacement. |
| Electrical Panel & Service UpgradesMost Popular |
| Homes adding EV chargers, electric ranges, or other high-draw appliances that push an older panel past its limit | A load calculation is part of every panel job. It confirms what the existing service can carry and what the new configuration needs to handle before anything is scheduled. |
| Electrical Safety Inspections |
| Buyers, landlords, and property managers who need a clear picture of the electrical system before a transaction or lease | An inspection covers the panel, the wiring, the grounding, and the outlets and fixtures throughout the property. Findings are explained before the visit ends. |
Call (720) 536-2956 to talk through the job and get a price before anything is scheduled. We are available every day from 8:30 AM to 10:30 PM.
(720) 536-2956